Cadeira de escritório em casa, cadeira de mesa de malha sem braço, cadeira de computador ergonômica, rodinhas giratórias, suporte traseiro ajustável, cadeira moderna com suporte lombar (preto)

R$ 493,36

Descrição

E aí, pessoal! Tudo bem? Hoje eu quero compartilhar com vocês a minha experiência com uma cadeira que mudou completamente a minha rotina de home office: a Cadeira de escritório em casa, cadeira de mesa de malha sem braço, cadeira de computador ergonômica, rodinhas giratórias, suporte traseiro ajustável, cadeira moderna com suporte lombar (preto). Sim, o nome é comprido, mas a cadeira é fantástica! Depois de muita dor nas costas e desconforto, resolvi investir em algo que realmente fizesse a diferença. Vem comigo que eu te conto todos os detalhes!

Uma Visão Geral da Cadeira de Escritório em Casa

Quando a gente pensa em montar um escritório em casa, a cadeira é um dos itens mais importantes, né? Passamos horas sentados, trabalhando, estudando, e uma cadeira inadequada pode acabar com a nossa produtividade e, pior, com a nossa saúde. Essa cadeira ergonômica promete resolver esses problemas, combinando conforto, suporte e um design moderno. A proposta é oferecer uma postura correta e evitar dores, mesmo após longas horas de uso. Vamos ver se ela entrega o que promete?

Design e Materiais da Cadeira Sem Braço

A primeira coisa que me chamou a atenção foi o design minimalista e moderno. A cor preta é super versátil e combina com qualquer ambiente. A malha respirável do encosto é excelente para evitar o acúmulo de calor, especialmente em dias mais quentes. A ausência de braços pode parecer estranha no começo, mas permite uma maior liberdade de movimento, ideal para quem gosta de se mexer enquanto trabalha. A estrutura parece bem resistente e as rodinhas giratórias deslizam suavemente, o que facilita a movimentação pelo escritório.

Conforto e Ergonomia: O Teste Real da Cadeira de Mesa de Malha

Aqui é onde a coisa fica interessante! O conforto é fundamental, e essa cadeira se mostrou bastante confortável. O suporte lombar ajustável é um diferencial incrível. Consegui ajustar a altura e a profundidade para que ele se encaixasse perfeitamente na curvatura da minha coluna. A diferença que isso fez nas minhas dores nas costas foi notável. A malha respirável também ajuda muito, evitando que eu fique suando mesmo depois de horas de trabalho. Experimentei usá-la por períodos longos, de 6 a 8 horas, e não senti o desconforto que sentia com a minha cadeira antiga.

Ajustabilidade e Rodinhas: Praticidade no Dia a Dia

A ajustabilidade é um ponto forte. Além do suporte lombar, a altura do assento também é ajustável, o que permite adaptar a cadeira à altura da mesa e às minhas preferências. As rodinhas giratórias funcionam muito bem em diferentes tipos de piso, desde madeira até carpete. Não precisei fazer força para me mover, o que é ótimo para evitar o cansaço. Elas são bem silenciosas também, o que é uma grande vantagem para quem trabalha em ambientes compartilhados ou precisa se concentrar.

Prós e Contras: Minha Opinião Sincera sobre a Cadeira de Computador

Como tudo na vida, a cadeira tem seus pontos positivos e negativos. Vamos aos prós:

  • Suporte lombar ajustável: Um divisor de águas para quem sofre com dores nas costas.
  • Malha respirável: Evita o acúmulo de calor e proporciona conforto em dias quentes.
  • Design moderno e minimalista: Combina com qualquer ambiente.
  • Rodinhas giratórias silenciosas e eficientes: Facilitam a movimentação.
  • Fácil montagem: Montei em uns 20 minutinhos, sem precisar de ferramentas complicadas.

E agora, os contras:

  • Ausência de braços: Pode ser um problema para quem está acostumado com apoio para os braços. Eu me adaptei bem, mas pode não ser para todo mundo.
  • Preço: Pode ser um pouco salgado para alguns orçamentos, mas, na minha opinião, vale o investimento pela qualidade e pelo conforto que oferece.

Conclusão: Vale a Pena Investir na Cadeira Ergonômica?

Depois de testar a Cadeira de escritório em casa, cadeira de mesa de malha sem braço, cadeira de computador ergonômica, rodinhas giratórias, suporte traseiro ajustável, cadeira moderna com suporte lombar (preto) por algumas semanas, posso dizer com segurança que ela transformou a minha experiência de home office. O conforto, o suporte lombar e o design moderno fazem dela uma excelente opção para quem busca uma cadeira ergonômica de qualidade. Apesar da ausência de braços, que pode ser uma questão de adaptação, e do preço, que pode ser um pouco mais alto, os benefícios superam os contras. Se você está sofrendo com dores nas costas ou simplesmente quer investir em uma cadeira que te proporcione mais conforto e produtividade, eu recomendo essa cadeira sem hesitar! Invista na sua saúde e no seu bem-estar, você não vai se arrepender!

Perguntas Frequentes (FAQ)

A cadeira é fácil de montar?

Sim, a montagem é bem simples e intuitiva. Vem com um manual de instruções claro e todas as ferramentas necessárias. Levei cerca de 20 minutos para montar sozinha.

A cadeira suporta qual peso máximo?

A cadeira suporta até 120 kg. É importante verificar as especificações do fabricante para garantir a segurança e a durabilidade do produto.

O suporte lombar é realmente eficaz?

Na minha experiência, sim! O suporte lombar é ajustável e se adapta à curvatura da coluna, proporcionando um alívio significativo das dores nas costas. É um dos principais diferenciais dessa cadeira.

A malha do encosto esquenta muito?

Não, a malha é respirável e ajuda a evitar o acúmulo de calor. Mesmo em dias quentes, o encosto permanece fresco e confortável.

As rodinhas funcionam bem em carpete?

Sim, as rodinhas deslizam suavemente em diferentes tipos de piso, incluindo carpete. Elas são silenciosas e não danificam o piso.

A ausência de braços incomoda?

Isso depende muito da sua preferência pessoal. No começo, pode ser um pouco estranho, mas eu me adaptei rapidamente e até prefiro a liberdade de movimento que a ausência de braços proporciona. Se você está acostumado com apoio para os braços, pode ser necessário um período de adaptação.

Qual a altura mínima e máxima do assento?

A altura do assento é ajustável, variando entre 45 cm e 55 cm. Isso permite adaptar a cadeira à altura da mesa e às suas preferências.

🔬 Especificações Técnicas

Detalhes técnicos

Cor ‎Preto
Peso do produto ‎13,4 Libras
Peso máximo recomendado ‎225 Libras
Fator de forma ‎Metal
Tipo de material ‎Malha.
Instruções de cuidado ‎Limpo
É necessária montagem ‎Sim
Número de produtos ‎1
Precisa de pilhas ou baterias? ‎Não
Componentes incluídos ‎Não
Marca ‎FDW
Dimensões do produto ‎41,4 x 42,42 x 102,62 cm; 6,08 quilogramas
EAN ‎0195030031695

Informações adicionais

Dimensões do pacote 57.1 x 49.5 x 16.8 centímetros
Número do modelo FDW Home Office Chair
ASIN B08T1NLN8V
Disponível para compra desde 14 janeiro 2021
Avaliações de clientes

4,3 de 5 estrelas

3.508 avaliações de clientes

4,3 de 5 estrelas

📷 Galeria de Imagens

💬 Avaliações de Clientes


Reviewer: Captain Bin
Rating: 5,0 de 5 estrelas
Title:
Review: Well, I needed to order two more office chairs, since my grandkids took my two for themselves and left me with their old chairs. I purchased two of the FDW Home Office Chairs three years ago. They have held up well and the wheels still roll freely.I was hoping the price hadn’t changed much, and it hadn’t. The price had actually gone down nearly three dollars.But, what is great about these chairs is that you can assemble them in about ten minutes. No kidding. All you need is a pair of scissors to get the boxes open. I assembled the seats while sitting on an IKEA stool. That made it easy on my back.Begin with the leg assembly. Within a few minutes you will have five wheels on the leg assembly. They snap in very easily, no need for a mallet. Then you place the seat support shaft into the bottom of the leg assembly. It just drops in place.While sitting down, I put the seat bottom (upside down) on my lap and attached the bottom plate and then the seat back. Make sure you look at the directions in order to get the plate orientated correctly. Put two screws in the plate, but do not tighten them yet.Now, place the seat back on to the plate. Put the four supplied screws into the appropriate holes. It is important to take your time with the screws loose in their holes and adjust the two plates so that you can align all the holes, otherwise you may end up stripping the threads. Just tighten the six screws by hand before you really tighten them up.The tightening of the screws will be the longest part of the assembly. When the seat/back is all tight, just place the seat assembly on the main seat support and you are finished.They are great, lightweight, easy rolling office chairs at an affordable price.
Reviewer: catnip ii
Rating: 5,0 de 5 estrelas
Title:
Review: Good quality mesh office chair at a very good price.
Reviewer: Kathy Shell
Rating: 5,0 de 5 estrelas
Title:
Review: This chair had some good reviews so I chose it over others. It was packaged well and there were good instructions. It went together easily; nice for a 77 year old gal. It is sturdier than my old one and much more comfortable. The back on the previous one was attached with a screw-in knob that allowed the back to adjust backward. It would never tighten, consequently, the back moved side to side. The back on this one is firmly attached to the bottom with 4 screws. I will use this as a desk chair and roll it across the room to my sewing machine. It rolls well on carpet.
Reviewer: searle
Rating: 5,0 de 5 estrelas
Title:
Review: I moved and there is carpeting where the table and chairs go, and my previous wooden-leg chairs were a nightmare. These were inexpensive so I bought them. They work very well, roll nicely on the carpet and look decent. They assembled sort-of well, but the seat bottom holes that the back bolts into are not well aligned and IT takes considerable pressure to force everything to align into place. But in the end they work — and only 6 bolts total to fight with so 20 minutes does the job.In summary 4 stars because of the bolt slight misalignment, but would have been 5 stars otherwise.Recommended.
Reviewer: Plays in Peoria
Rating: 4,0 de 5 estrelas
Title:
Review: Great chair! Super easy to put together, very easy to adjust and super comfy. The mesh back is fastened on with zippers so it can be removed and washed. The zipper pulls were missing, which will make removing and replacing the back kind of a pain. Not worth returning. I may contact the seller and ask to have some sent.

📢 Informações do Fabricante

5 avaliações para Cadeira de escritório em casa, cadeira de mesa de malha sem braço, cadeira de computador ergonômica, rodinhas giratórias, suporte traseiro ajustável, cadeira moderna com suporte lombar (preto)

  1. Captain Bin

    Well, I needed to order two more office chairs, since my grandkids took my two for themselves and left me with their old chairs. I purchased two of the FDW Home Office Chairs three years ago. They have held up well and the wheels still roll freely.I was hoping the price hadn’t changed much, and it hadn’t. The price had actually gone down nearly three dollars.But, what is great about these chairs is that you can assemble them in about ten minutes. No kidding. All you need is a pair of scissors to get the boxes open. I assembled the seats while sitting on an IKEA stool. That made it easy on my back.Begin with the leg assembly. Within a few minutes you will have five wheels on the leg assembly. They snap in very easily, no need for a mallet. Then you place the seat support shaft into the bottom of the leg assembly. It just drops in place.While sitting down, I put the seat bottom (upside down) on my lap and attached the bottom plate and then the seat back. Make sure you look at the directions in order to get the plate orientated correctly. Put two screws in the plate, but do not tighten them yet.Now, place the seat back on to the plate. Put the four supplied screws into the appropriate holes. It is important to take your time with the screws loose in their holes and adjust the two plates so that you can align all the holes, otherwise you may end up stripping the threads. Just tighten the six screws by hand before you really tighten them up.The tightening of the screws will be the longest part of the assembly. When the seat/back is all tight, just place the seat assembly on the main seat support and you are finished.They are great, lightweight, easy rolling office chairs at an affordable price.

  2. catnip ii

    Good quality mesh office chair at a very good price.

  3. Kathy Shell

    This chair had some good reviews so I chose it over others. It was packaged well and there were good instructions. It went together easily; nice for a 77 year old gal. It is sturdier than my old one and much more comfortable. The back on the previous one was attached with a screw-in knob that allowed the back to adjust backward. It would never tighten, consequently, the back moved side to side. The back on this one is firmly attached to the bottom with 4 screws. I will use this as a desk chair and roll it across the room to my sewing machine. It rolls well on carpet.

  4. searle

    I moved and there is carpeting where the table and chairs go, and my previous wooden-leg chairs were a nightmare. These were inexpensive so I bought them. They work very well, roll nicely on the carpet and look decent. They assembled sort-of well, but the seat bottom holes that the back bolts into are not well aligned and IT takes considerable pressure to force everything to align into place. But in the end they work — and only 6 bolts total to fight with so 20 minutes does the job.In summary 4 stars because of the bolt slight misalignment, but would have been 5 stars otherwise.Recommended.

  5. Plays in Peoria

    Great chair! Super easy to put together, very easy to adjust and super comfy. The mesh back is fastened on with zippers so it can be removed and washed. The zipper pulls were missing, which will make removing and replacing the back kind of a pain. Not worth returning. I may contact the seller and ask to have some sent.

Adicionar uma avaliação